![]() ![]()
You will need to set your Arduino in DFU mode, and flash its USB controller. Compiling and Flashing onto the Arduino UNO R3 If all goes well, the printout in the terminal will let you know it finished the build! Follow the directions on flashing Joystick.hex onto your Teensy, which can be found page where you downloaded the Teensy Loader application. Open a terminal window in the Switch-Fightstick directory, type make, and hit enter to compile. My Switch-Fightstick directory is in the same directory as my LUFA directory, so I set LUFA_PATH =. Next, you'll need to make sure the LUFA_PATH inside of the makefile points to the LUFA subdirectory inside your LUFA directory. Then, download or clone the contents of this repository onto your computer. Unzip the folder, rename it LUFA, and place it where you like. You can download it in a zipped folder at the bottom of this page. If that does not work, you can try installing avr-gcc with brew.) (Note for Mac users - the AVR MacPack is now called AVR CrossPack. See this issue and this thread on GBAtemp for more information. For Windows, you will need the latest AVR toolchain from the Atmel site. For Linux, follow their instructions for installing the GCC Compiler and Tools. Go to the Teensy website and download/install the Teensy Loader application. Currently there are issues running under Windows.Ĭompiling and Flashing onto the Teensy 2.0++ In a pinch, an Arduino UNO R3 with the ATMega328p disabled (connect RESET to GND) will work.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |